Acetonitrile LC-MS , JT Baker 4L CAS 75-05-8 -Handlers Certificate Required
9853-03-4L
Toxic 6.1B ; DG3 flammable Handlers certificate required
|
Danger |
| Formula: H₃CCN MW: 41,05 g/mol Density: 0,782 g/cm³ (20 °C) Flash Pt: 2 °C (closed cup) Storage Temperature: Ambient |
CAS Number: 75-05-8 EINECS: 200-835-2 UN: 1648 ADR: 3,II |
Specification
| For Laboratory,Research,or Manufacturing Use | = 99.9 % |
| Assay (CH₃CN) | ≥99.9 % |
| Appearance | Passes Test |
| Gradient Elution Test (a.u.) - 254 nm | ≤0.0005 |
| Gradient Elution Test (a.u.) - 210 nm | ≤0.002 |
| Fluorescence Trace Impurities, measured as Quinine Base - at 450 nm Emission | ≤0.3 ppb |
| Fluorescence Trace Impurities, measured as Quinine Base - at Emission Maximum for Impurities | ≤1.0 ppb |
| Color (APHA) | ≤10 |
| Residue after Evaporation | ≤0.8 ppm |
| Water (H₂O) | ≤100 ppm |
| LC/MS Suitability - Largest Response on ESI- Positive Mode (as Reserpine) | ≤25.0 ppb |
| LC/MS Suitability - Largest Response on ESI- Negative Mode (as 4-Nitrophenol) | ≤25.0 ppb |
| Trace Impurities - Aluminum (Al) | ≤25.0 ppb |
| Trace Impurities - Calcium (Ca) | ≤25.0 ppb |
| Trace Impurities - Chromium (Cr) | ≤5.0 ppb |
| Trace Impurities - Cobalt (Co) | ≤5.0 ppb |
| Trace Impurities - Copper (Cu) | ≤5.0 ppb |
| Trace Impurities - Iron (Fe) | ≤5.0 ppb |
| Trace Impurities - Lead (Pb) | ≤5.0 ppb |
| Trace Impurities - Lithium (Li) | ≤5.0 ppb |
| Trace Impurities - Magnesium (Mg) | ≤10.0 ppb |
| Trace Impurities - Manganese (Mn) | ≤5.0 ppb |
| Trace Impurities - Nickel (Ni) | ≤5.0 ppb |
| Trace Impurities - Potassium (K) | ≤10.0 ppb |
| Trace Impurities - Sodium (Na) | ≤50.0 ppb |
| Trace Impurities - Tin (Sn) | ≤5.0 ppb |
| Trace Impurities - Zinc (Zn) | ≤10.0 ppb |
| Filtered through a 0.1 micron filter. |
Unit Qty: ea
Availability: 0 in stock
